Publications related to UGC

2024.  J. Sun, F. Zunino, K. Scrivener, Hydration and phase assemblage of limestone calcined clay cements (LC3) with clinker content below 50 %, Cem. Concr. Res. 177 (2024) 107417. https://doi.org/10.1016/j.cemconres.2023.107417.

 

2023.   F. Zunino, A two‐fold strategy towards low‐carbon concrete, RILEM Tech. Lett. 8 (2023) 45-58. https://doi.org/10.21809/rilemtechlett.2023.179.

Publications related to LC3 and low carbon cements

2024.  F. Zunino, K. Scrivener, Reactivity of kaolinitic clays calcined in the 650 °C–1050 °C temperature range: Towards a robust assessment of overcalcination, Cem. Concr. Compos. 146 (2024) 105380. https://doi.org/10.1016/j.cemconcomp.2023.105380.
2023.  R.J. Flatt, N. Roussel, H. Bessaies-Bey, L. Caneda-Martínez, M. Palacios, F. Zunino, From physics to chemistry of fresh blended cements, Cem. Concr. Res. 172 (2023) 107243. https://doi.org/10.1016/j.cemconres.2023.107243.
2023.   F. Kanavaris, M. Vieira, S. Bishnoi, Z. Zhao, W. Wilson, A. Tagnit Hamou, F. Avet, A. Castel, F. Zunino, T. Visalaksh, F. Martirena, S.A. Bernal, M.C.G. Juenger, K. Riding, Standardisation of low clinker cements containing calcined clay and limestone: a review by RILEM TC-282 CCL, Mater. Struct. 56 (2023) 169. https://doi.org/10.1617/s11527-023-02257-y.
2022.   F. Zunino, Y. Dhandapani, M. Ben Haha, J. Skibsted, S. Joseph, S. Krishnan, A. Parashar, M.C.G. Juenger, T. Hanein, S.A. Bernal, K.L. Scrivener, F. Avet, Hydration and mixture design of calcined clay blended cements: review by the RILEM TC 282-CCL, Mater. Struct. 55 (2022) 234. https://doi.org/10.1617/s11527-022-02060-1.

2022.   F. Zunino, K. Scrivener, Insights on the role of alumina content and the filler effect on the sulfate requirement of PC and blended cements, Cem. Concr. Res. 160 (2022) 106929. https://doi.org/10.1016/j.cemconres.2022.106929.

2022.   J. Garces-Vargas, Y. Díaz-Cardenas, F. Zunino, J. Ribalta-Quesada, K. Scrivener, F. Martirena, The Challenge of Grinding Ternary Blends Containing Calcined Clays and Limestone, Minerals. 12 (2022) 1170. https://doi.org/10.3390/min12091170.

2022.   F. Zunino, K. Scrivener, Microstructural developments of limestone calcined clay cement (LC3) pastes after long-term (3 years) hydration, Cem. Concr. Res. 153 (2022) 106693. https://doi.org/10.1016/j.cemconres.2021.106693.

2021.   F. Zunino, F. Martirenna, K.L. Scrivener, Limestone calcined clay cements (LC3), ACI Mater. 118 (2021), No.3,  doi:10.14359/51730422.

2021.   F. Zunino, K.L. Scrivener, The reaction between metakaolin and limestone and its effect in porosity refinement and mechanical properties, Cem. Concr. Res. 140 (2021). https://doi.org/10.1016/j.cemconres.2020.106307.

2020.   F. Zunino, K.L. Scrivener, Assessing the effect of alkanolamine grinding aids in limestone calcined clay cements hydration, Constr. Build. Mater. 266B (2020). https://doi.org/10.1016/j.conbuildmat.2020.121293.

2020.   F. Zunino, K.L. Scrivener, Factors influencing the sulfate balance in pure phase C3S/C3A systems, Cem. Concr. Res. 133 (2020). doi:10.1016/j.cemconres.2020.106085.

2020.   F. Zunino, E. Boehm-Courjault, K. Scrivener, The impact of calcite impurities in clays containing kaolinite on their reactivity in cement after calcination, Mater. Struct. 9 (2020). doi:10.1617/s11527-020-01478-9.

2020.   F. Zunino, K.L. Scrivener, Increasing the kaolininte content of raw clays using particle classification techniques for use as supplementary cementitious materials, Constr. Build. Mater. 244 (2020). doi:10.1016/j.conbuildmat.2020.118335.

2019.   F. Zunino, K.L. Scrivener, The influence of the filler effect in the sulfate requirement of OPC and blended cements, Cem. Concr. Res. 126 (2019). doi:10.1016/j.cemconres.2019.105918.

2018.   K.L. Scrivener, F. Avet, H. Maraghechi, F. Zunino, J. Ston, A. Favier, et al., Impacting factors and properties of Limestone Calcined Clay Cements (LC3), Green Mater. (2018). doi:https://doi.org/10.1680/jgrma.18.00029.

2018.   F. Zunino, D. Bentz, J. Castro, Reducing setting time of blended cement paste containing high-SO3 fly ash (HSFA) using chemical/physical accelerators and by fly ash pre-washing, Cem. Concr. Compos. 90 (2018) 14-26 doi:10.1016/j.cemenconcomp.2018.03.018

2017.   D.P. Bentz, P.E. Stutzman, F. Zunino, Low-Temperature Curing Strength Enhancement in Cement-Based Materials Containing Limestone Powder, Mater. Struct. 50 (2017).

2017.   D.P. Bentz, C.F. Ferraris, S.Z. Jones, D. Lootens, F. Zunino, Limestone and Silica Powder Replacements for Cement: Early-Age Performance, Cem. Concr. Compos. 78 (2017) 43–56. doi:10.1016/j.cemconcomp.2017.01.001.

Other publications

2022.   F. Zunino, K. Scrivener, The influence of sulfate addition on hydration kinetics and C-S-H morphology of C3S and C3S/C3A systems, Cem. Concr. Res. 160 (2022). https://doi.org/10.1016/j.cemconres.2022.106930.

2022.   F. Georget, B. Lothenbach, W. Wilson, F. Zunino, K.L. Scrivener, Stability of hemicarbonate under cement paste-like conditions, Cem. Concr. Res. 153 (2022) 106692. https://doi.org/10.1016/j.cemconres.2021.106692.

2017.   R. Serpell, F. Zunino, Recycling of hydrated cement pastes by synthesis of α′H-C2S, Cem. Concr. Res. 100 (2017) 398–412. doi:10.1016/j.cemconres.2017.08.001.